IDMinder License Agreement

End User License Agreement and Safety Notice. Agreement version: R1.2, effective October 14, 2026.

Licensor: D Bell Holdings, L.L.C., a Louisiana limited liability company, doing business as UnitedTechs ("we", "us").

PLEASE READ THIS AGREEMENT CAREFULLY. BY CLICKING "I ACCEPT", INSTALLING, OR USING THE SOFTWARE YOU ("you", "Licensee") AGREE TO BE BOUND BY IT. IF YOU DO NOT AGREE, CLICK "DECLINE" AND DO NOT USE THE SOFTWARE. If you don't accept this Agreement, you're entitled to a full refund (see Section 14). The full text of this Agreement is also posted at unitedtechs.com/license-ic7760.

1. THE SOFTWARE

"Software" means IDMinder, the edition named on your license, its license file, documentation and any updates we provide. The Software monitors your transceiver over its computer connection and commands the transceiver to transmit voice recordings that YOU have stored in the transceiver's own memory.

2. LICENSE GRANT

Subject to this Agreement and payment of the license fee, we grant you a personal, non-exclusive, non-transferable license, revocable only as described in this Agreement (for breach under Section 13 or a refund under Section 14), to install and use one copy of the Software:

(a) by one person, the Licensee named on the license;

(b) on one (1) computer at a time, subject to the transfer overlap described below (one transfer per 365 days); and

Moving to a new computer. You may move your license to a new computer at any time by installing the Software there and starting it while connected to the internet. When the new computer first starts the Software, both computers may use it for a thirty (30) day transfer overlap. After the overlap, the Software runs only on the new computer, and the old computer will no longer start the Software; it will show a message that the license has moved. Only one transfer overlap can run at a time, and a license can start a new transfer only once every 365 days, counted from the start of the last overlap. During an overlap a third computer cannot start the Software, and during the rest of the 365 days a new computer cannot start it either; it will show a message asking you to contact us. A computer the license has moved away from cannot take the license back by itself. We can reset these limits through our support process, for example when a computer fails or is replaced. If a move happened that you did not intend, contact us and we will put the license back on the right computer. The Software is licensed, not sold. We and our licensors keep all rights not expressly granted. The Software is licensed, not sold. We and our licensors keep all rights not expressly granted.

3. RESTRICTIONS

You may not: (a) copy, share, publish, rent, lease, lend, sell, sublicense or distribute the Software or your license file; (b) remove, alter or hide any serial number, license information, copyright, trademark or other notice; (c) bypass, disable or tamper with any license check; (d) reverse engineer, decompile or disassemble the Software, except to the extent applicable law expressly allows despite this limitation; (e) use the Software to provide a commercial service to others; or (f) use the Software in violation of any law or regulation.

4. SERIAL NUMBER, LICENSE CHECKS AND TRACEABILITY

(a) Every license carries a unique serial number that is recorded against the sale to you. The serial number is stored in a digitally signed license file (license.dat) that is delivered with the Software. Copies found outside the terms of this Agreement can be traced to the original license.

(b) Each time it starts, the Software checks that the license file is genuine and that the Software has not been altered. If the check fails, the Software will not run and will display a message asking you to contact support. The Software does not report this condition to us on its own.

(c) The Software creates an installation ID on each computer it is installed on and sends it with the startup check, as described in Section 10.

(d) License checks may include the startup check described in Section 10. If your license ends because you breached this Agreement or received a refund, the serial may be marked invalid and the Software may refuse to start after that check. UnitedTechs does not remotely shut down a copy that is already running. You must stop using and delete the Software when your license ends. We may refuse support for any serial number that is shared or resold without our consent.

5. YOU ARE THE CONTROL OPERATOR - STATION IDENTIFICATION REMAINS YOUR RESPONSIBILITY

(a) The Software is an operating aid only. It does not replace your own knowledge of, and compliance with, the rules that govern your station, including in the United States 47 CFR Part 97 and in particular Section 97.119 (station identification), or the equivalent rules of your country.

(b) You, as the station licensee and control operator, remain solely responsible for proper identification, for the content of every transmission, and for the proper operation of your station at all times.

(c) You are responsible for recording a correct, legible identification in the transceiver's voice memory, for choosing appropriate settings, and for confirming that the Software is running and working before relying on it.

(d) The Software can fail to identify, or identify at the wrong time, for reasons that include but are not limited to: loss of the USB or serial connection, incorrect port, address or baud settings, transceiver firmware or menu settings, other programs using the same port, computer sleep, crashes or updates, power loss, and software defects. Always be ready to identify manually.

(e) Do not operate unattended or remotely unless the rules that apply to you permit it and you have taken the required measures. Use IDMinder only while a control operator is at the control point (local or permitted remote control). It is not designed for automatic control.

6. TRANSMITTER, RF AND EQUIPMENT SAFETY

The Software causes your transceiver to transmit. Before use you must make sure that a suitable antenna or dummy load is connected, that your station, including any amplifier, is correctly configured, and that your station complies with the radio-frequency exposure limits that apply to you (in the United States, 47 CFR 1.1310 and 97.13(c)). Test first at low power into a dummy load. You are responsible for any interference, equipment damage or injury arising from transmissions from your station.

7. NO WARRANTY

TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" AND "AS AVAILABLE", WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND. WE DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT, ACCURACY, AND ANY WARRANTY THAT THE SOFTWARE WILL BE UNINTERRUPTED, ERROR-FREE OR COMPATIBLE WITH YOUR EQUIPMENT OR ITS FIRMWARE. TO THE EXTENT THE LAW ALLOWS, YOU WAIVE THE WARRANTY AGAINST REDHIBITORY DEFECTS UNDER LOUISIANA CIVIL CODE ARTICLES 2520 THROUGH 2548, AND THE WARRANTY OF FITNESS FOR USE UNDER ARTICLE 2524. THIS DOES NOT LIMIT YOUR REFUND RIGHTS UNDER SECTION 14 OR OUR REFUND POLICY. Some jurisdictions do not allow the exclusion of implied warranties, so some of these exclusions may not apply to you.

8. LIMITATION OF LIABILITY

TO THE MAXIMUM EXTENT PERMITTED BY LAW: (a) WE WILL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, OR FOR ANY LOSS OF DATA, PROFITS OR USE, OR FOR ANY FINE, FORFEITURE, PENALTY, LICENSE ACTION OR NOTICE OF VIOLATION ISSUED BY ANY REGULATOR, OR FOR DAMAGE TO RADIO OR OTHER EQUIPMENT, HOWEVER CAUSED AND UNDER ANY THEORY OF LIABILITY, EVEN IF WE WERE ADVISED OF THE POSSIBILITY; AND (b) OUR TOTAL LIABILITY FOR ALL CLAIMS RELATING TO THE SOFTWARE OR THIS AGREEMENT WILL NOT EXCEED THE AMOUNT YOU PAID FOR THE LICENSE. These limits do not apply to liability for intentional or gross fault, for physical injury, or to any other liability that cannot be limited under applicable law. Some jurisdictions do not allow these limits, so they may not fully apply to you.

9. INDEMNITY

You will defend, indemnify and hold harmless D Bell Holdings, L.L.C. and its members, managers and agents from any claim, fine, loss or expense (including reasonable attorneys' fees) arising from your transmissions, your breach of this Agreement, or your violation of any law or regulation, except to the extent caused by our fault.

10. PRIVACY AND INTERNET CONNECTION

(a) Startup check. When the Software starts, it makes a short, encrypted connection to unitedtechs.com to ask three questions: (1) is a newer version available; (2) is this serial number registered to a purchase and still valid (for example, not refunded or ended under this Agreement); and (3) which computer this license is on, so it runs on one computer at a time with the transfer overlap (Section 2). The request sends three things: your serial number, the Software version, and an installation ID. It does not send your name, email address, call sign, recordings, logs or settings.

(b) What the installation ID is. The installation ID is created on your computer from three pieces of information: the computer's name, your Windows user name, and the machine ID that Windows assigns to the computer. The Software combines these with your serial number and a fixed product value (a "salt") and runs them through a one-way cryptographic function (SHA-256). The result is a long string of letters and numbers. It is one-way: neither we nor anyone else can work back from it to your computer name, user name or machine ID. Because your serial number is part of it, the same computer produces a different ID for every serial number, so it cannot be used to link you across licenses or to anything outside the Software.

(c) What it is used for. We use the installation ID only to know which computer your license is on, to run the 30-day transfer overlap when you move it, to apply the one-transfer-per-365-days limit, and to stop the license running on a computer it has moved away from. We do not use it for advertising, we do not sell it, and we do not combine it with other information about you.

(d) What we keep and for how long. For each serial number we keep: the installation ID of the computer the license is on; during a move, the installation ID of the new computer; the date each was first and last seen; and the installation IDs of up to 20 computers the license has moved away from, with the date of the move, so a retired computer cannot take the license back; and the date the last transfer started, to apply the one-transfer-per-365-days limit. These are kept while your license is active and are deleted when we reset your license at your request, or within 90 days after your license ends. We also keep a short record of each check (time, serial number, version and result, without the installation ID) for up to 30 days to run and secure the service.

(e) First start must be online. Each new installation must complete one successful check (this is also what starts a move) with unitedtechs.com before it can be used. After that, if the check cannot be reached, the Software keeps working for 30 days after the last successful check on that computer. Setting the computer's clock back, or editing, copying or deleting the Software's check record, ends the offline period until the next successful check. When the offline period ends, the Software will ask you to connect and try again before it will start.

(f) No remote shutdown. UnitedTechs does not push a command that shuts down a copy while it is running. A serial marked invalid, or a computer the license has moved away from, is enforced the next time the Software starts and completes this check (or when the offline period ends). Full details: unitedtechs.com/privacy.

11. TRADEMARKS AND NON-AFFILIATION

Icom is a trademark of Icom Incorporated. Yaesu is a trademark of Yaesu Musen Co., Ltd. Windows is a trademark of Microsoft Corporation. All other names are the property of their respective owners. Model names are used only to identify the equipment the Software works with. The Software is an independent product of D Bell Holdings, L.L.C.; it is not made, endorsed, sponsored or supported by Icom, Yaesu, Microsoft or any radio manufacturer.

12. UPDATES AND SUPPORT

Updates within the major release you purchased (for example, any R1.x release) are provided free of charge. A new major release (for example, R2.x) may be offered as a paid upgrade. We are not required to provide any particular update, feature or level of support. Updates are governed by this Agreement unless they come with a new one.

13. TERM AND TERMINATION

This Agreement lasts until terminated. It ends automatically if you breach it. On termination you must stop using and delete the Software. Sections 3, 5 through 9, 11, 15 and 16 survive termination.

14. REFUNDS

You can get a full refund of the license fee you paid if you ask within 14 days of your purchase date. If you ask us for troubleshooting help, your refund window extends until 14 days after troubleshooting is complete. Troubleshooting means fixing problems with the Software as it is; it doesn't include adding new features. Troubleshooting is complete when we email you that it's finished, or when you tell us you want to stop. To ask, use our contact form and choose "Refund request." Your license ends when the refund is issued and you agree to delete the Software. This section does not limit any right you may have under applicable law.

15. EXPORT

You will comply with all applicable export control and sanctions laws in using the Software. You confirm you are not located in, or a resident of, an embargoed country or region, and are not on any U.S. government restricted-party list.

16. GENERAL

This Agreement is governed by the laws of the State of Louisiana, without regard to its conflict-of-laws rules, and any dispute will be resolved in the state or federal courts located in Louisiana, unless the law of your place of residence requires otherwise. If any part of this Agreement is found unenforceable, the rest remains in effect. This Agreement is the entire agreement between you and us about the Software and replaces any earlier understanding. Our failure to enforce any term is not a waiver. You may not assign this Agreement without our written consent.

Contact: D Bell Holdings, L.L.C. (UnitedTechs) - support through unitedtechs.com.